New Transcraft Combo Flatbed Trailers

New Transcraft Combo Flatbed Trailers

As one of the first combo platforms in the industry, this flatbed is known for its rugged dependability and increased payload. Ideal for owner operators and fleets alike, this trailer is strong, lightweight, and designed to maximize load capacity. With four beam ratings to choose from, this trailer can be configured to meet your specific requirements.

Categories: , ,

Available Configurations





Superior Design & Maximum Payload

The main beam design comes with a limited lifetime warranty and provides a stronger web to flange
attachment for long-life performance. Potential corrosion is eliminated between the flange and web by welding the high tensile steel at all flange-web joints. In addition, the “K” type structural assembly reduces side bending.

Lower Maintenance & Increased Uptime

The interlocking, four nailer, apitong and aluminum floor system connects using two grade-8 floor screws at each crossmember. The double shear connection reduces racking and damage to nailers around the screw holes. In addition, the radius edges on the “C” section siderail reduce the wear of winch straps, while the aluminum rub rail with recessed grooves protects conspicuity tape.

Better Highway Visibility for Safety

The enhanced visibility lighting system offers three stop/tail/turn lights and five dual-function side marker lights. The side marker lights also function as turn signals for improved motorist visibility.

Superior Corrosion Resistance

100% of steel surfaces are shot blasted prior to applying primer and paint, eliminating the need for chemical pretreatments. From the ultra high-zinc, epoxy primer and galvanic coating, to the automotive grade acrylic urethane paint, this trailer is made to resist corrosion and increase resale value.


  • Length: 48’- 53’
  • Width: 102”

Beam Rating(s)

  • 474: 47,000 lb in 4’ / 53,000 lb in 10’ / 80,000 lb evenly distributed
  • 554: 55,000 lb in 4’ / 60,000 lb in 10’ / 93,700 lb evenly distributed
  • 654: 65,000 lb in 4’ / 70,000 lb in 10’ / 110,400 lb evenly distributed
  • 734: 73,000 lb in 4’ / 80,000 lb in 10’ / 125,000 lb evenly distributed

Est. Base Weight(s)

  • 474: 9,644 lb / 4384 kg
  • 554: 9,735 lb / 4,416 kg
  • 654: 9,935 lb / 4,506 kg
  • 734: 10,735 lb / 4,869 kg

Main Beam Design

  • Main beam flange and web fully welded at all flange-web joints
    High-strength 50,000-PSI steel web
  •  Web to flange attached by 100% automated continuous weld
  • Heat-treated, high-strength steel flanges rated at 130,000 PSI
  • Cross braces on 24” centers and knee braces on nominal 48” centers
    Lifetime main beam warranty

Front End Design

  • Bright finish, fabricated aluminum front crossmember
  • Center mount glad hands, 7-way on removable access panel
  • 1/4” steel coupler plate tested to SAE J133 performance criteria

Rear End Design

  • Three rear stake pockets integral to rear plate
  • Horizontal bumper end caps for corrosion protection
  • Rubber dock bumpers mounted vertically with three bolts
  • Bumper assemblies are United States Department of Transportation
    (DOT) and Transport Canada compliant

Siderail Design

  • 6061-T6 extruded aluminum siderail
  • Radius edges and extruded aluminum rub rail with recessed groove
  • Extruded aluminum stake pockets on 24” centers
  • Large diameter double pipe spools

Crossmember Design and Floor System

  • 80K high tensile, 4” steel “I” beam crossmembers on 12” centers
  • Mylar gaskets installed between aluminum and steel components
  • Maximum strength, interlocking combination aluminum and wood floor
    boards, installed with two grade-8 screws per crossmember
  • Eight 1-1/8” thick aluminum floorboards installed with two inner and outer
    apitong nailers and two grade-8 screws per crossmember
  • Vertical weld on both sides of siderail to crossmember connection
  • Optional 5” aluminum crossmembers on 12” centers available


  • Widespread K-bracing and angular gussets
  • Suspension support gussets with triangular truss design
  • Air suspension rated at 23,000 lb per axle
  • 121” tandem widespread axle setting
  • Axle alignment, large bearings, parallel “P” spindle wheel ends

Electrical Wiring / Lights

  • Air and electrical accessible through removable aluminum front plate
  • Below deck air and wire routing
  • Enhanced visibility lighting system, LED lights, five side marker lights per
    side, dual function lights correspond with turn signals
  • Anti-lock brake system (ABS)

Preparation / Finishes

  • 100% shot blasted prior to assembly, no chemical pretreatment required
  • Automotive grade paint system with ultra high-zinc epoxy primer and
    galvanic-coated prior to trailer assembly
  • Steel surfaces painted prior to assembly with automotive grade acrylic
    urethane paint


  • Additional air and electric configurations
  • Additional aluminum components
  • Specialized coil and floor packages
  • Alternate crossmember spacing
  • Customized bumper filler plates
  • Factory installed bulkheads
  • Lightweight package
  • Multiple axle configurations, sliding suspensions and lift axles
  • Multiple accessories, freight securement and storage options
  • Weight reduction holes

Trailer Financing in Four Steps

  • Application Process
  • Quick Approval
  • Sign Documents
  • Funding

Types of Financing

Our Team will help you determine which type of financing is best for your situation.
We will discuss the pro and cons for each solution so we can make an informed decision.

CAPITAL LEASE: A capital lease is an operating expense, which reduces taxes. It allows you to use the equipment over a set term. At the end of the term, you own the asset for a nominal fee. You may resell it at that point and you can also upgrade equipment at any time during the term.

CONDITIONAL SALES CONTRACT: A Loan helps you finance the total cost of the equipment. You own the equipment and your payments cover interest on the loan and reduce the loans principle. You claim tax deductions for the interest paid and on the annual amortization of the equipment.

OPERATING LEASES: An operating lease is a rental agreement giving you the right to use the equipment without ownership. This is an off balance structure and several options can be offered once you reach end of term.

CUSTOM SOLUTIONS: Once we understand your situation, we can develop a custom solution tailored to your needs.


So, you’re shopping for a trailer and you found one that costs $300 dollars less. Sounds like a good deal, right? Not so fast: that decision could cost you $10,000 dollars over the lifecycle of your trailer. In fact, it’s highly likely that within the first year of ownership, you will spend 2 to 3 times more than what you saved on the initial cost of the trailer.

Why? Choosing a lower quality trailer means you’ll be spending more on maintenance and repairs when things go wrong. It also means less time on the road – eating into your profits. Click to see how Wabash trailers are designed to keep you on the road and save you money in the long run.